glowplug problem?
Thread Starter
|
Mountain Pass
Joined: Oct 2007
Posts: 107
Likes: 0
glowplug problem?
I am getting a p0380 code for the glowplugs/module on my Cali. truck. According to my AE, the plugs cycle normally. I also did the KOER glowplug test and it passed. No problem starting the truck. Any ideas?
Laughing Gas
Joined: May 2007
Posts: 1,100
Likes: 0
From: Davis, Ca.
I would say your controller is going or gone south. Here is a link https://www.ford-trucks.com/forums/3...ighlight=P0380 Give Clay a call at Riffraff Diesel Performance
PREMIUM SPONSOR
Joined: Feb 2009
Posts: 6,038
Likes: 73
DTC P0380 is set when the PCM detects a malfunction in the GPCM.
Possible causes:
shorted/open power
open/grounded circuit
worn or damaged GPCM
Riffraff Diesel: Motorcraft GPCM/ Glow Plug Control Module
Possible causes:
shorted/open power
open/grounded circuit
worn or damaged GPCM
Riffraff Diesel: Motorcraft GPCM/ Glow Plug Control Module
Thread Starter
|
Mountain Pass
Joined: Oct 2007
Posts: 107
Likes: 0
DTC P0380 is set when the PCM detects a malfunction in the GPCM.
Possible causes:
shorted/open power
open/grounded circuit
worn or damaged GPCM
Riffraff Diesel: Motorcraft GPCM/ Glow Plug Control Module
Possible causes:
shorted/open power
open/grounded circuit
worn or damaged GPCM
Riffraff Diesel: Motorcraft GPCM/ Glow Plug Control Module
