I have my 36/14.50R/16 Parnelli Jones Dirt Gripz on 16x10 Weld Stone Crushers for sale on ebay. If anyone is interested here's the link. PJ's On Stone Crushers

 

Dog,

So, what are you getting now? Going Bigger?

 

Yeah, It's in the shop now... Finally, although they haven't started on it yet. I hope to have it back by this weekend.

I picked up the 3" hangers and track bar relocation kit from Edge to add to the 5.5" fabtech springs I already have in the front. I would have gone with the 4.5" hangers but I wanted to avoid the immediate need for crossover steering right now.

In the rear I got a deal on a pair of 12" Atlas springs. So they will be removing the blocks in the rear and replacing with a shim or whatever is needed to level the back with the front. They will also do the driveshaft work and possibly rotate the front differential if necessary.

Also picked up longer braided brakelines, and 6 shiny new 7100 bilsteins with the ORU dress up kits. Two of the bilsteins I got from ROLLNXL. I also bought 6 used 7100 bilsteins but decided at the last minute to buy 4 new to perfectly match the 2 I got from rollnxl and the ORU kits. So I'll be selling those as soon as I take a picture of them.

The tires are 39/18 Mickeys mounted on 16.5x14 Weld Mountain Crushers. Unfortunately it has now grown out of the garage for good.

Next week it's off to the speed shop for a new 255 lph fuel pump and #42 injectors to better feed that KB puffer!

Got the itch to build a new truck yet?

 

Sounds good! One thing about the 18" wide Mickeys... they pull all over the road (or at lest in Vegas on my truck they did). My first set of tires were the 39/18 Mickeys on my 16.5x14 Welds. However, they were a smooth riding tire. One thing I was warned about with the Mickeys, because they are so wide and tend to pull alot, they do some wearing on the steering components. Its not as bad on a straight axle truck (vs. a IFS truck), but it still effects it. You'll have to post some pics when you get it done. I'd love to see that setup with those Mountain Crushers.

Yeah, I got an itch to build a new one, but I think I'm going to wait for the new body style? We'll see

 

Dog, check your email about this.

 

i don't know how many more dan (dcspecial) will need, but are htey 14" travel? if so i'd be interested in a pair.....

 

Jon, he emailed me back with the part number, they are 12" travel with 170/60 valving. If I get them I'll have 10 total, so looks like I'll be selling at least 2.

 

that sounds good,,,too bad for me because i need some 14" travel ones!