Help ASAP
Thread Starter
|
Cargo Master
Joined: Apr 2007
Posts: 2,333
Likes: 1
From: St. Louis, Mo.
Help ASAP
Hey all- I'm changing out my alternator(trying) -What is the trick to getting the 3 pin connector loose from the alternator- Tried every which way & no luck. TIA.
Cargo Master
Joined: Jun 2003
Posts: 3,292
Likes: 6
From: Ardenvoir, Washington
Take two slotted screw drivers... put one of them down between the alum housing and plug on the back side, applying some pressure on the plug.. Take the other screw drive and pry up under the plug on the side..
