When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Morning Steve. i got a full day tomorrow ahead of me again.... first this afternoon im going to pick up the Kenwood HU i bought. gonna put it in tomorrow along with tracing an brake light and reverse light electrical problem on it.. its down to 1 brake light and no reverse lights and fuses are good and it has brand new bulbs.
Well hopefully this weekend will be the start of more spring like weather; and Mother Nature's (Step Child) "Old Man Winter" can Hybernate til next year........
Morning Steve. i got a full day tomorrow ahead of me again.... first this afternoon im going to pick up the Kenwood HU i bought. gonna put it in tomorrow along with tracing an brake light and reverse light electrical problem on it.. its down to 1 brake light and no reverse lights and fuses are good and it has brand new bulbs.
Look for corrosion grounding in bulb sockets first -just replace them.
Then trace the wires.
Be sure to silicon seal the top and sides of the lenses - but leave the bottoms open so they can drain
I was an RV TECH and saw that a lot.
Use a SILICON sealer - because it will stay where you put it.
Run your thumb over it to pack it in.
(Lick ya thumb first so it is wet. Silicone don't stick to anything wet)
You really need to go with a 10 wide wheel to go 315s the 16x8 factory wheels is way to narrow and really hurts the tire and risks a blowout. SOme Mickey Thompsons look great.
Originally Posted by GRANDELARIAT
Nothing happened to my truck I just found some 315's at a good deal. I like the 99 lariat wheels alot though.