Full time 4x4
Thread Starter
|
New User
Joined: Jun 2007
Posts: 13
Likes: 0
Full time 4x4
I have a question, my 76 F150 is a 360 auto with full time 4 wheel drive. Can this be converted to lock out hubs. I have heard " no way " and " no problem ". So know I'm wordering what the pro's think. Thanks
Zombie Survivalist
Joined: Feb 2009
Posts: 14,809
Likes: 3
From: Rock Springs, WY, USA
to change the hubs, if youve never done it before, will take an allen wrench, a pair of pliers and about an hour and a half of your time. in other words, yes, and its easy. but you HAVE to have the part time conversion kit in your t-case before you even think about it or you wont be goin anywhere. if it was me, id just sell the NP203 thats in it and get an NP205 to replace it.
Fleet Mechanic
Joined: Feb 2007
Posts: 1,326
Likes: 48
From: Middle TN
Before I went to that much expense and work to install a kit, I would seriously look for a NP205 and change it over. Np205s are not too hard to find right now and would be much more reliable in the long run and everything bolts up.
