Trans Cooling Lines Problem
Thread Starter
|
Logistics Pro
Joined: Feb 2000
Posts: 3,565
Likes: 9
From: Sun River St. George
Trans Cooling Lines Problem
I made up a nice set of steel transmission lines and have come up about an inch to short at the radiator. The radiator is one of those China aluminum deals off e-bay. Looks very well made and the price was right. I need a solution for the cooling line connections and thought of using a pair of adapters that screw into the aluminum radiator and then screw the lines I have already made up into them. No rubber or half-assed hoses here, all steel and brass. Has anyone done this recently enough so that you may still have a PN# or source for the adapters? Suggestions? Or am I "screwed"...
