Does anyone have 4" pipe?
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
thats a hellalot i was hoping i could grab a piece for supercheap. being on a budget sucks
Hotshot
Joined: Jan 2008
Posts: 13,144
Likes: 11
From: Rochdale MA
It is pretty much the same thickness of exhaust pipe. It is also galvanized. So it can be left there too. If you pick up a Walker BTM you can slide the muffler over the pipe so it looks like you have a muffler but it is actually straight piped. Come to our tech day saturday and we will take care of it for you.
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
It is pretty much the same thickness of exhaust pipe. It is also galvanized. So it can be left there too. If you pick up a Walker BTM you can slide the muffler over the pipe so it looks like you have a muffler but it is actually straight piped. Come to our tech day saturday and we will take care of it for you.
Hotshot
Joined: Jan 2008
Posts: 13,144
Likes: 11
From: Rochdale MA
Most of us are getting there Fri night and will be leaving on Sat. Can you make it on Fri night? I will stay as late as needed to get it set for you. I should be there around 8 ish Yoi can give me a call on my cell
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
[QUOTE=megawatt00;8532312]
im about 4 hr from CT i would love to do it man, but class starts at 8 on saturday. 
this sucks. i am going to call an electrical place in about 10 min, they said it was about 50 bucks for the 10' section.
i want to go to that G2G so bad but i have fire class on saturdays...is anyone around sunday? i am thinking about going to the electric store today after class..[/QUOTE
Most of us are getting there Fri night and will be leaving on Sat. Can you make it on Fri night? I will stay as late as needed to get it set for you. I should be there around 8 ish Yoi can give me a call on my cell
Most of us are getting there Fri night and will be leaving on Sat. Can you make it on Fri night? I will stay as late as needed to get it set for you. I should be there around 8 ish Yoi can give me a call on my cell
this sucks. i am going to call an electrical place in about 10 min, they said it was about 50 bucks for the 10' section.
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
heres what im gunna do, go to the store get the pipe, get a 45degree elbo, connect a ft piece of pipe on the end of that to exit the truck totally eliminating my over the axel piece that i have, so essentially i would have a straight piece of pipe all the way back, is this ok?
Hotshot
Joined: Jan 2008
Posts: 13,144
Likes: 11
From: Rochdale MA
That sounds like it will work out well. GO to NAPA and get band clamps they make life much easier. Good luck and be safe on Saturday
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
sounds good man, enjoy urself at the g2g sorry i cant go
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
just not on a saturday lol. or if its that big mabey i will take off. take some pics of this one. i enjoed looking at the ones from when you guys put your injectors in
New User
Joined: Feb 2010
Posts: 5
Likes: 0
25... I got to the FL line in 17 hours and your house in 22 ;-)
Post Fiend
Joined: Feb 2008
Posts: 10,977
Likes: 5
From: Lancaster, Pa.
. You can get away with it but if you run into that one shop that won't inspect you,
. You should be OK, I gave my extra piece away 2 years ago so no go here..Good luck tomorrow, should pass with flying colors, no emisions testing, smoke that is
Thread Starter
|
Fleet Mechanic
Joined: Jun 2009
Posts: 1,866
Likes: 8
From: Fleetwood, PA
thanks for all ur help guys
Mike - not a big deal. just need some bumper liscene plate lights and backup light then im good to pass
but i just went to a diesel store in ephrata got a piece of alum 10' 4" pipe for 50 bucks, got a band clamp for now and going to weld it once i get home.
ill post some pics, it looks really good with that sold piece all the way from the DP back.
i was happy.
Mike - not a big deal. just need some bumper liscene plate lights and backup light then im good to pass
but i just went to a diesel store in ephrata got a piece of alum 10' 4" pipe for 50 bucks, got a band clamp for now and going to weld it once i get home.
ill post some pics, it looks really good with that sold piece all the way from the DP back.
i was happy.