must be a tech nightmare
Thread Starter
|
5th Wheeling
Joined: Jul 2009
Posts: 35
Likes: 0
must be a tech nightmare
any advice on replacing the upper seal and clip on a 6.0 diesel injector they sell it but not sure why when the clip seams to be impossible to extract from housing any ideas would be greatly appreciated!!!!!!!!!!!
Post Fiend
Joined: Oct 2009
Posts: 12,123
Likes: 35
From: N. Fort Worth, tx
I didnt know they sold just the o-ring. huh learned something. Ill have to check with the parts guy.
now on to your issue. I have swaped a few around and didnt pull the clip out couldnt find a way. I just a small pick (dental hook type deal) to pull the old one out and pushed in a good one. getting the good one in is rather tricky though.
now on to your issue. I have swaped a few around and didnt pull the clip out couldnt find a way. I just a small pick (dental hook type deal) to pull the old one out and pushed in a good one. getting the good one in is rather tricky though.
Posting Guru
Joined: Feb 2009
Posts: 1,170
Likes: 1
From: Moyock, NC
I didnt know they sold just the o-ring. huh learned something. Ill have to check with the parts guy.
now on to your issue. I have swaped a few around and didnt pull the clip out couldnt find a way. I just a small pick (dental hook type deal) to pull the old one out and pushed in a good one. getting the good one in is rather tricky though.
now on to your issue. I have swaped a few around and didnt pull the clip out couldnt find a way. I just a small pick (dental hook type deal) to pull the old one out and pushed in a good one. getting the good one in is rather tricky though.
I see you finally got your avatar....nice!
