help hub bolt ????? 911

Reply Subscribe

Thread Tools

Search this Thread

Jan 17, 2010 | 03:47 PM

ampslw

Thread Starter

Senior User

Joined: Nov 2009

Posts: 182

Likes: 0

From: northwestern Ontario

help hub bolt ????? 911

The hub bolt is not what is described in the PDF of the Dana 135 rear end. Even in the pictures of the PDF it doesn't show a hub bolt like this. Now I have truck apart to the point of pulling the hub off but don't want to pull off the hub unless I know how to put it back on with proper torche and installation. Does anybody know how this one works? Is this what they call a ratchet style?

These are pics of the hub nut.

help

http://www2.dana.com/pdf/AXSM-8941.pdf

Jan 17, 2010 | 03:59 PM

jk_hooper

Mountain Pass

Joined: Mar 2008

Posts: 199

Likes: 1

From: Uniontown KY

U need the lare hub socket. U just unscrew the nut. It is a one peice assy. It does have backwards threads on the drivers side. I been pulling mine today and changing wheel bearings. Torque to 70 ft lbs, loosen 1/4 turn then retorque to 20 ft lbs. That came from haynes manual for my 99. Good luck.

edit: Sorry i just relooked at ur pics. Urs is a little diff than mine.