How do I make it bigger?
Thread Starter
|
Posting Guru
Joined: Jan 2006
Posts: 1,605
Likes: 1
From: Elkhorn, WI
How do I make it bigger?
the fuel filler neck that is... 
do you guys have any way to make the fuel inlets larger so i can actually fill the truck up? the large nozzles dont fit and even the smaller ones i cant let them fill up by themselves, i have to do it by hand and fill very slowly otherwise it shuts the pump off. not a big deal but when its below zero and windy not as much fun as you'd think!
do you guys have any way to make the fuel inlets larger so i can actually fill the truck up? the large nozzles dont fit and even the smaller ones i cant let them fill up by themselves, i have to do it by hand and fill very slowly otherwise it shuts the pump off. not a big deal but when its below zero and windy not as much fun as you'd think!
Post Fiend
Joined: Oct 2003
Posts: 5,903
Likes: 1
From: MICHIGAN
https://www.ford-trucks.com/forums/5...4x4-cc-ps.html
Check out: http://pages.prodigy.net/stevebaz/_i...az/index3.html
about halfway down the page
Look for High Speed Filler Necks for $40.00
Check out: http://pages.prodigy.net/stevebaz/_i...az/index3.html
about halfway down the page
Look for High Speed Filler Necks for $40.00
Logistics Pro
Joined: Nov 2004
Posts: 3,550
Likes: 5
From: Lancaster County PA
It is a worthwhile mod. I did mine several years ago (one of the first things I did, in fact). Speeds fillup time dramatically, but I still have to trickle in the last couple of gallons because that fuel is so darn foamy.
But, the first 13-14 gallons can go in at full flow with the skinny car nozzle and nearly full flow with a high speed "big truck" nozzle.
But, the first 13-14 gallons can go in at full flow with the skinny car nozzle and nearly full flow with a high speed "big truck" nozzle.
Post Fiend
Joined: Feb 2009
Posts: 8,773
Likes: 1
From: Texas Coast
