I have removed the six allen head screws, the large retainer ring just inside the hub, and the small retainer ring around the inner shaft. Cant seem to get the inner or outer parts of the hub to move. I have a Haynes manual...and in it they talk about a stop screw... I don't seem to have one of those... I do have the socket I need..... Broke 3 Lugs off. Dam Aluminum wheels Got Lucky .. The wheel stayed on with 1 lug nut intact... Also anyone know the name or part # of the fiber washer in between the orher 2 washers that I will be getting to shortly?

Thanks
Paul

 

install 2 of the allen head screws opposite each other and wiggle the hub side to side as you pull.

 

did u get the spindal locknut off u need a special sockit to get it off most parts stores got them good luck

 

The inner hub assembly needs to come out first.

 

the one i bought was like $20 from autozone
or if u had some pipe u can make one