2003 Edge Tow Hooks

Reply Subscribe

Thread Tools

Search this Thread

Dec 4, 2009 | 01:06 PM

pinger

Thread Starter

Freshman User

Joined: Dec 2009

Posts: 49

Likes: 0

From: Casa Grande,Az

2003 Edge Tow Hooks

Has anyone installed tow hooks on this model? If so,did the holes line up or did you have to drill? Thanks Bill

Dec 4, 2009 | 04:56 PM

Areyouforcereal?

Senior User

Joined: Dec 2009

Posts: 123

Likes: 0

From: Victoria, Tx

If you find some off a 4x4 ranger the holes should line up. The frames for the trucks are the same.

Dec 4, 2009 | 06:37 PM

pinger

Thread Starter

Freshman User

Joined: Dec 2009

Posts: 49

Likes: 0

From: Casa Grande,Az

Thanks, I just wanted to make sure that the frames were the same. I want to install a Roadmaster base plate to tow my Ranger behind my motorhome..The instructions said that the kit for the ranger edge had to have tow hooks but it also says that you have to remove them to install the baseplate. You don't reinstall them but use the holes for the base plate..Just looking for a comformation before purchasing the baseplate..BTW it has holes already in the frame for the tow hooks..Thanks again. Bill

Reply Subscribe