Pulling Engine
Thread Starter
|
Elder User
Joined: Sep 2007
Posts: 518
Likes: 0
From: Huntsville, TX
Pulling Engine
Well I have some time off coming up and I am ready to get to work on my 85. I blew the head gaskets so that needs to be replaced. My buddy had to replace his valve cover gaskets, and he said that it is hard to do that with the engine in the truck, so he said I should pull it. Does anybody have step by step instructions on how to pull it?
Also I figure while it is out I might as well do it right and rebuild it so I do not have to pull it again. Are there any good rebuild kits out there? What all should be done to it?
Thanks,
Kyle
Also I figure while it is out I might as well do it right and rebuild it so I do not have to pull it again. Are there any good rebuild kits out there? What all should be done to it?
Thanks,
Kyle
Thread Starter
|
Elder User
Joined: Sep 2007
Posts: 518
Likes: 0
From: Huntsville, TX
Can you send that again? I changed email addresses and forgot to change it here on FTE.
