Vendor needed

Reply Subscribe

Thread Tools

Search this Thread

Nov 20, 2009 | 05:29 PM

rotun

Thread Starter

Reads ***** rules!

Joined: Nov 2007

Posts: 1,105

Likes: 3

From: So.Ca./ N.E. UT

Vendor needed

for wheel simulators, 1991 F-700, 11/2"lugs, 10 lug, 2 h.hole on 22.5x7.5. Anybody know any FTE vendors that can get these?

Nov 22, 2009 | 12:34 AM

rotun

Thread Starter

Reads ***** rules!

Joined: Nov 2007

Posts: 1,105

Likes: 3

From: So.Ca./ N.E. UT

bumpity bump

Nov 24, 2009 | 10:20 AM

unchaned

New User

Joined: Jan 2008

Posts: 8

Likes: 0

rotun
that is the same 10 lug bolt circle as big rigs so any chrome shop or truck dealer can get them for you the wheel with is 8.5 on big rigs which is made up on the rear of the wheel the front of the wheel is the same

Nov 24, 2009 | 01:40 PM

rotun

Thread Starter

Reads ***** rules!

Joined: Nov 2007

Posts: 1,105

Likes: 3

From: So.Ca./ N.E. UT

Thanks, I don't have a problem getting them.....just wanted to see if we had any vendors on here that could use the business. These are 7.5" wheels (verified by the production stamp).

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump