Calibrating overhead console display
Thread Starter
|
Elder User
Joined: Jul 2004
Posts: 637
Likes: 4
From: Media, PA
Calibrating overhead console display
How do I do it? I had to purchase a new digital display unit for my 2002 Expy after the original one died and wasn't repairable. There is a sticker on the module stating the "compass is not calibrated. Please refer to service parts manual for calibration instructions". If this is something I can do myself, I will...just need to know how. Thanks!
Fleet Owner
Joined: Dec 2006
Posts: 20,637
Likes: 37
From: Lost in Pa.
The procedure is in the owners manual, it's pretty simple as I have done it before, press some buttons and drive in circles. But I don't remember exactly, if you don't have your manual I could look up for you.
Moderator
Joined: Dec 2005
Posts: 2,815
Likes: 148
From: Billings, Montana
If you don't have your owners manual, you can find it here. https://www.fleet.ford.com/maintenan...ls/default.asp
Thread Starter
|
Elder User
Joined: Jul 2004
Posts: 637
Likes: 4
From: Media, PA
Thanks for the replies. I didn't even think of looking in my owner's manual. I saw that sticker and immediately thought "dealership". I found the info in my manual and will go drive in some circles tomorrow! Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
Xv10
Excursion - King of SUVs
8
Oct 31, 2015 05:11 PM
Xv10
Excursion - King of SUVs
5
Oct 28, 2015 04:38 PM
