Need to replace the trunion bearings in my Dana 60. The front end is out of a 91. Anyone know the part numbers? Bearing and Bushing? Thanks!

 

Read thru this link. It is the D60 bible in my opinion. If this doesn't have what you are looking for it can't be had. LOL

Pirate4x4.Com - Extreme Four Wheel Drive

 

If you have the Ford truck parts catalog, the info can also be had...both the Ford & Dana part numbers are listed.

Does Pirate list the Ford part numbers?

 

I,m going to assume you mean "kingpin bearings" when you say trunion so here goes: Upper gasket:#37307, Spring:#37300, Retainer:#620180,Bushing#41886,The lower cup,seal,bearing,and race come as a kit#706395X. These are all genuine Spicer part numbers! Hope this helps.

 

Thanks for all the info everyone!

Ford6.0 - I checked the numbers with what I wrote down off the pirate website and it all matched.

I've referred to it as a Kingpin Dana 60, and everytime I say it, people tell me it can't be a Kingpin, or they are called trunnion bearings, etc....

Thanks again!