dual master/drum:drum/manual ??
Thread Starter
|
Laughing Gas
Joined: Jul 2003
Posts: 1,224
Likes: 19
From: scotia. NY 12302
dual master/drum:drum/manual ??
i know most people upgrade to dual master/drum/disk manual or dual master/ drum/disk/power, but what i would like to do is dual master with my stock drum/drum/manual system. i've tried to search this out and cannot find some of the threads i remembered. is my idea possible or did i dream it. i thought there was a kit with a bracket to mod the existing area on crossmember to accept a mustang mc and it had a dif push rod?? any help appreciated. dick r
Cargo Master
Joined: Feb 2008
Posts: 2,795
Likes: 129
From: Windermere Valley,B.C. Ca
Thread Starter
|
Laughing Gas
Joined: Jul 2003
Posts: 1,224
Likes: 19
From: scotia. NY 12302
thanks f-1. i guess when i read that one, i was thinking it only fit 53-56? although, that's the bracket i was remembering. i'll do all the reading and call the vendors to check prices and make sure it will fit an f-1. my brakes have worked fine as is, but i don't like the feeling of a pedal going right to the floor at an intersection. here's to dual braking. dick r
Cargo Master
Joined: Jun 2001
Posts: 2,571
Likes: 22
From: Oxford, Indiana
Laughing Gas
Joined: Apr 2009
Posts: 751
Likes: 1
From: orange county, ca.
sorry about the link to another site, but if it's like my '47 ford car here's what i made.
Technical TECH WEEK---'47 ford dual pot master install - THE H.A.M.B.
Technical TECH WEEK---'47 ford dual pot master install - THE H.A.M.B.
