Rear Breaks question help.
Thread Starter
|
Freshman User
Joined: Mar 2009
Posts: 25
Likes: 0
Rear Breaks question help.
The issue is on my 05 F250 PSD, the driver rear break seems to be coated in oil, really the entire inner of the wheel is coated. I am not leaking break fluid so I am thinking it's the axle that is bad, maybe a seal but my knowledge in that area is limited. I looking for suggestions on what to look for before I take in to the dealer, also what to tell the dealer. I still have a little factor warranty left maybe this would be covered?
Also after a driving there is a smell of burning oil coming from that wheel..
Thanks in advance!!
Also after a driving there is a smell of burning oil coming from that wheel..
Thanks in advance!!
