390 build
Thread Starter
|
Posting Guru
Joined: May 2006
Posts: 1,327
Likes: 1
From: Kingsport, TN
390 build
Have a '75 F-250 SC with a 360-4v that needs severe engine work, AND a 390-2v donor. Will build the 390 & swap intake manifolds / add flowmaster headers - to start with. Have saved an earlier "photo post" of a FE rebuild.
The 390 will be dismantled / cleaned / rebuilt, after boring .030. Thinking of installing 360 new pistons. Thinking of installing an RV cam. Viewed all relavant posts prior to this post. Any suggestions ?? The D-60 rear end will be changed from an open 4.10 to LSD 3.7. Has a 435 4-spd trans.
Question - which "catalogs" have engine parts ?
The 390 will be dismantled / cleaned / rebuilt, after boring .030. Thinking of installing 360 new pistons. Thinking of installing an RV cam. Viewed all relavant posts prior to this post. Any suggestions ?? The D-60 rear end will be changed from an open 4.10 to LSD 3.7. Has a 435 4-spd trans.
Question - which "catalogs" have engine parts ?
