quick question please help

Reply Subscribe

Thread Tools

Search this Thread

Oct 1, 2009 | 04:44 PM

The Mim

Thread Starter

New User

Joined: May 2009

Posts: 10

Likes: 0

quick question please help

i drained my tranny fluid. how many quarts do i have to put back into my 01 f250 v10

Oct 1, 2009 | 05:08 PM

dkf

Hotshot

Joined: Mar 2007

Posts: 10,101

Likes: 40

From: Pa

Heres a link to changing the ATF in a 4R100. How much fluid you add back in depends on if you drained all the fluid in the system or just drained the fluid in the pan only. Your owners manual will give you some capacities also.

Changing ATF Fluid in a E4OD and 4R100 transmission .: Articles

Oct 1, 2009 | 05:21 PM

The Mim

Thread Starter

New User

Joined: May 2009

Posts: 10

Likes: 0

well i only drained the pan and about 5 or 6 quarts of tranny fluid came out. so that means that i only have to put back in 5 or 6 quarts of fluid? right? i did this on accident. im no mechanic.

Oct 1, 2009 | 10:42 PM

Mr-Pipeline

Senior User

Joined: Dec 2008

Posts: 439

Likes: 4

From: Lubbock, Texas

correct, only need to replace the amount you drained. After you add 5 quarts...start the truck and check the tranny fluid level on the dip stick and add the last little bit (checking after each add) until you have the correct level.

Reply Subscribe