Brakes? HELP!!!!
Thread Starter
|
New User
Joined: Jul 2009
Posts: 3
Likes: 0
Brakes? HELP!!!!
I have a 1994 F-250 auto trans 4WD. Just replaced rear shoes and drums and all all hardware in back. Adjusters are at proper tightness. replaced front pads as well as brake booster and master cyl. Have been bleeding the brakes now for a while and still have a little to no pedal. when pumping the brakes i am noticing air bubbles inside the master cyl? It was bench bleed then bleed again once installed in vehicle. I have no air coming out of any of the corners. Any thoughts or suggestions for chasing this down? thanks
Brian W
Brian W
