Automatic folding mirrors
Thread Starter
|
Freshman User
Joined: Aug 2008
Posts: 42
Likes: 0
Automatic folding mirrors
I have a question reguarding the automatic folding mirrors. On pass. side my mirror stopped folding in when switch is pulled. Has anyone had this problem and if so what gear, ect should I be looking for when I tear into it. All help is greatly appreciated.
Laughing Gas
Joined: Aug 2008
Posts: 832
Likes: 110
I saw that there is a bulletin on these mirrors but may not be helpful for the extreme situation you describe. It said somehting like mirrors can get out of sync, or motion become jerky if one of the mirrors was being moved intothe normal running position and before it got there a person walked into it or the vehicle was moving and hit a tree or post. Solution is to move mirrors to operational position. then by hand move one mirror at a time back towards rear bumper unitl you hear the noticeable crack (and no further). After both mirrors are in the "crack" position then go inside and pull that switch.
That crack is fairly loud but not breakeage;it is just the std safety break-back in case of impact.
Hope that this works for you.
That crack is fairly loud but not breakeage;it is just the std safety break-back in case of impact.
Hope that this works for you.
Thread
Thread Starter
Forum
Replies
Last Post
