What Are You Doing To Your Truck?
#76
Ok - "new" truck and new progress. Well - my "progress" is most peoples nightmare
In other words - I am cutting up the 90's border patrol bronco I just got. Anyone need any parts?
There was no front end on the thing but here's a list of what will be going on craigslist.
Fiberglass shell/top - CHEAP need it gone!
8.8 rear end. Not sure on gears - but it's got a posi!
Door skins - with windows. The guy hacked up the inside sheet metal so they won't be worth much.
Grey glove box door
Aluminum radiator
1 steel rim with 31" BFG mud terrain
Fuel Injected 302 auto trans (heavy duty ribbed case) and T-case
Tail gate with glass
Power mirriors - chrome, fold in ones
In other words - I am cutting up the 90's border patrol bronco I just got. Anyone need any parts?
There was no front end on the thing but here's a list of what will be going on craigslist.
Fiberglass shell/top - CHEAP need it gone!
8.8 rear end. Not sure on gears - but it's got a posi!
Door skins - with windows. The guy hacked up the inside sheet metal so they won't be worth much.
Grey glove box door
Aluminum radiator
1 steel rim with 31" BFG mud terrain
Fuel Injected 302 auto trans (heavy duty ribbed case) and T-case
Tail gate with glass
Power mirriors - chrome, fold in ones
#78
#80
#82
thats sweet, always nice to get tires with good life on them, when i bought my extra set of rims they had almost no life, only 1 or 2 was even good enough for a spare tire...
#83
#86
#87
Went to the muffler shop today and took off the flowmaster 40 series thats been haunting me since i got my truck! I put on a more stock muffler(finally its quite!) Later when i home I got under the truck to take a better look at the work done and realized i have no catalytic converter on my truck. LOL (Brola headers/3inch piping/resonator/muffler)
#90
Just finished doing upper & lower ball joints on both sides, and went ahead and changed out the bearings in the front while I was at it. It was easier than I expected, but took considerably longer too.
(Ironically, a neighbor whined to the home owners association that the back of my truck was sticking a couple feet out of the garage while I worked through the afternoon. Apparently she's decided that the work I was doing is "gross" and suggested that I'm turning the neighborhood into a ghetto.) Poor woman apparently doesn't know her glass from a hole in the wall if she finds that disruptive. My apologies for ruffling her delicate sensibilities. hahaha
On the bright side - the front end is all nice and snug again. Tomorrow I'll detail it's brains out, polish up the headlights so they don't look so dingy (it deserves to be pretty) and take it in for an alignment. :-)
(Ironically, a neighbor whined to the home owners association that the back of my truck was sticking a couple feet out of the garage while I worked through the afternoon. Apparently she's decided that the work I was doing is "gross" and suggested that I'm turning the neighborhood into a ghetto.) Poor woman apparently doesn't know her glass from a hole in the wall if she finds that disruptive. My apologies for ruffling her delicate sensibilities. hahaha
On the bright side - the front end is all nice and snug again. Tomorrow I'll detail it's brains out, polish up the headlights so they don't look so dingy (it deserves to be pretty) and take it in for an alignment. :-)