When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did alot of research and reading on turbo boost leaks. Come to find out all six boots that go from turbo to intercooler to intake head can loosen. I made homemade guage out of 3" pvc cap, pressure gauge, & air hose adapter. I boost the air pressure to 20psig on turbo system, come to find out 4 out of 6 boots were leaking atleast slightly. I tightened them up and gained 3 to 4 pounds of boost at wide open throttle. Boost went from 18 to 21 or 22PSIG.
'99 Powerstroke F-250 7.3 Turbo Diesel, Edge II Evolution programmer, Banks Monster Exhaust, K&N stageII cold air intake, Triple plate billet torque converter, transmission shift kit, Firestone rear air bags, Firestone air compressor/adjustable ride height, Custom lighting and stereo system.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">