clearance lights
Thread Starter
|
Senior User
Joined: Mar 2008
Posts: 368
Likes: 0
From: Jupiter
clearance lights
I have water condensation in all in clearance lights on top of my truck. How does the orange lens come off of the base? The screws arnt holding the lens down, it looks like it just pops off but I couldnt get it to and didnt want to break it. Do I need to unscrew them from the truck and then somehow they come apart?
I want to dry them out and seal them up better.
I want to dry them out and seal them up better.
Fleet Owner
Joined: May 2009
Posts: 21,437
Likes: 76
From: Gilbert, PA
the amber lens' do not come off the gray bases. If you remove the 2 screws and take the complete lite off. I have cleaned the lights very good w a scrub brush then let them dry. I then used crazy glue to "seal" the lens to the base
Thread Starter
|
Senior User
Joined: Mar 2008
Posts: 368
Likes: 0
From: Jupiter
ok thanks, ill just unscrew them and let them air out the just seal the lens and base up with some silicone or something.
I though they came apart though because you can order the lenses separate.
I though they came apart though because you can order the lenses separate.
