Motor conversion..EFI to Carb
Thread Starter
|
New User
Joined: Jan 2007
Posts: 18
Likes: 0
Motor conversion..EFI to Carb
I have a 92 F150 302 5.0 and Im wanting to swap it out from EFI to carb. Im trying to find the easiest way to do this without spending a ton of money. Im looking around for any advice anyone has in regards to parts description.
What type of manifold should I be looking for when doing the swap as well as carb?
Will I have to relocate fuel lines?
What obstacles should I take into account when doing the convertion?
what other add ons should I look towards during the convertion?
I was planning on finding a 90s mustang at a junk yard but all the motors have already been pulled so im thinking im going to have to do a part by part swap. Any suggestions would be very helpful as this is something new to me
What type of manifold should I be looking for when doing the swap as well as carb?
Will I have to relocate fuel lines?
What obstacles should I take into account when doing the convertion?
what other add ons should I look towards during the convertion?
I was planning on finding a 90s mustang at a junk yard but all the motors have already been pulled so im thinking im going to have to do a part by part swap. Any suggestions would be very helpful as this is something new to me
Posting Guru
Joined: Mar 2006
Posts: 1,526
Likes: 2
From: fargo, nd
imo id get an edelbrock performer intake, 500cfm edelbrock carb, new duraspark box, new duraspark distributor, and a fuel pressure regulator to regulate the stock in tank pump's pressure down from 40psi to a carb friendly 7psi
