fuel pump in tank
Thread Starter
|
New User
Joined: Aug 2009
Posts: 2
Likes: 0
fuel pump in tank
so my brother has a 86 bronco ll and its my project car... he got it out of a friends yard after ten years, and it actually ran, until the other day. im 99% sure the fuel pump in the tank is out. i know how to change it the pita way by dropping the tank, but i read some where that it can be done without that. that a hole can be cut out somewhere and then patched up. if anyone can shed some light on this, i would greatly appreciate it. thank you for your time.
More Turbo
Joined: Mar 2006
Posts: 687
Likes: 1
Do some searches on this forum, this was asked a year or three ago, and it was explained and illustrations were posted. I remember reading it but do not have the time to search it. It showed the location to cut the hole.
Thread Starter
|
New User
Joined: Aug 2009
Posts: 2
Likes: 0
alright, i appreciate it. i will try the search bara again. i suppose its the same as the NECCO search button, and its about impossible for me to get the right word combination. but it is nice to know that its out there, so i have something to look forward to. thanks again.
Post Fiend
Joined: Jun 2002
Posts: 13,873
Likes: 3
From: Atlanta GA
If you use
+fuel +pump +floor in the search box and search in the B2 forum you will pull up three pages of stuff
Once such topic you might find useful
https://www.ford-trucks.com/forums/2...k-removal.html
+fuel +pump +floor in the search box and search in the B2 forum you will pull up three pages of stuff
Once such topic you might find useful
https://www.ford-trucks.com/forums/2...k-removal.html
