Chassis project - your opinion please.
Thread Starter
|
Senior User
Joined: Jan 2008
Posts: 104
Likes: 0
Chassis project - your opinion please.
Re-placing bed on 1995 F150. So I was going to hit chassis.
Tentative plan:
1) Wire brush with angle grinder to get loose stuff off.
2) Hit with phosphoric acid/concrete etcher ... maybe in a garden sprayer(?).
3) Hose off residue.
4) Wipe down with acetone.
5) Roll/brush Chassis Saver Black Satin on (already bought 2 quarts).
Good plan ???
Tentative plan:
1) Wire brush with angle grinder to get loose stuff off.
2) Hit with phosphoric acid/concrete etcher ... maybe in a garden sprayer(?).
3) Hose off residue.
4) Wipe down with acetone.
5) Roll/brush Chassis Saver Black Satin on (already bought 2 quarts).
Good plan ???
Elder User
Joined: Jan 2008
Posts: 635
Likes: 0
Not sure of the prep but it sounds good. I think it's a great idea. I can't wait to do this myself. And I definately aprove of the satin or even flat. I don't like shiny frames much nor do I like anything other than black or maybe very dark charcoal on frames.
