Alignment specs?
Fleet Mechanic
Joined: Nov 2003
Posts: 1,372
Likes: 14
From: West Cornwall, CT
For an F-250 4x4 with standard suspension:
LH RH Total/Split
Camber 0.15 +/- 0.75 deg 0.15 +/- 0.75 deg 0.0 +/- 0.75
Caster 3.3 +/- 1.2 deg 3.3 +/- 1.2 deg 0.0 +/- 0.55
Toe 0.1 +/- 0.25
LH RH Total/Split
Camber 0.15 +/- 0.75 deg 0.15 +/- 0.75 deg 0.0 +/- 0.75
Caster 3.3 +/- 1.2 deg 3.3 +/- 1.2 deg 0.0 +/- 0.55
Toe 0.1 +/- 0.25
New User
Joined: Aug 2009
Posts: 2
Likes: 0
Alignment Specs 08 2WD F-250
Lou, Would you happen to know the specs for an 08 2wd F-250? The reason I ask is I'd like to raise the front of the truck 2", but I'm worried about causing positive camber. The truck already looks like it has positive camber from the factory and I think a 2" lift on the front will cause it to have too much. Any help would be great, Thanks East
Fleet Mechanic
Joined: Nov 2003
Posts: 1,372
Likes: 14
From: West Cornwall, CT
The '08 specs should be the same as the 05 through 07 trucks. For a 2WD F-250:
...........LH...................RH................ ......Total/Split
Camber 0.62 +/-0.75.... 0.62 +/- 0.75........0.0 +/- 0.75
Caster 3.8 +/- 1.2........3.8 +/- 1.2...........0.0 +/- 0.75
Toe .................................................. ..0.1 +/- 0.25
The F-350's have the same alignment specs so these numbers should apply after your lift kit is installed.
Lou Braun
...........LH...................RH................ ......Total/Split
Camber 0.62 +/-0.75.... 0.62 +/- 0.75........0.0 +/- 0.75
Caster 3.8 +/- 1.2........3.8 +/- 1.2...........0.0 +/- 0.75
Toe .................................................. ..0.1 +/- 0.25
The F-350's have the same alignment specs so these numbers should apply after your lift kit is installed.
Lou Braun
Thread
Thread Starter
Forum
Replies
Last Post
Adigo
1997 - 2006 Expedition & Navigator
1
Feb 4, 2016 09:28 AM
