X code springs
Thread Starter
|
New User
Joined: Jul 2006
Posts: 4
Likes: 0
X code springs
I have a 99 f350 psd 4x4 that sits nose down. i was wondering if the X code plow prep spring will raise the nose about an inch and a half or will i need a leveling kit also? I have an 8' minute mount II on the front of the truck. i understand if it squats a little with the plow on, my concern is how the truck normally with no plow. Oh yea the current front springs are rated for 5200lbs. i forget what letter code that is. any input is much appreciated
Super Moderator
Joined: Aug 2008
Posts: 37,370
Likes: 1,858
From: Frederick, MD
bottom line here is you will need the x-springs period. If you are gonna plow then you need the 6K springs.
It should raise it up what you need too. Better check to make sure you have a tranny cooler on that truck too while you are at it.
It should raise it up what you need too. Better check to make sure you have a tranny cooler on that truck too while you are at it.
