Help!!
Thread Starter
|
Junior User
Joined: Jul 2008
Posts: 72
Likes: 0
Help!!
Just did ball joints on my truck, and now no 4x4 with the ESOF. Put moog Ball joints and bought the seals from ford. Any ideas? I haven't checked the air vent method yet, But the light on the dash is comming on. Thanks in advance, Mike 
Thread Starter
|
Junior User
Joined: Jul 2008
Posts: 72
Likes: 0
Ok, I checked the air vent method and it went straight to defrost. I checked the vaccuum line its ok. It has to be the seal, But which seal is it? The large Knuckle seal or the Yellow O-ring? Thanks Mike
