AutoTransID
Thread Starter
|
New User
Joined: Feb 2002
Posts: 7
Likes: 0
From: Montrose USA
AutoTransID
I would welcome some help in ID'ing the tranny attached to my 335 series motor. It's not a one piece unit (good I guess because the bellhousing has a chunck out of it). The casting number on the tranny appears to be D2AP7006HB and the tag indicates PHB E7 D3ZFAG250. The pan has 14 bolts in it. I can't get my eye on any oval with FORD written in it, like on the C6 in my shop, so I hope it's not from some other automaker, bolted on with an adapter bellhousing. I'm going to pull the moter and tranny out of the vehicle ('48 F1 Panel) in a couple of days, looking hard for that Ford oval!
