There is not a tag that I can find on my tranny, but I read these numbers off the drivers side rear. Are they good for anything? I.D. wise?
D4AP7006BA18 It's possible that I missed on 1 or 2.

Thanks

 

Is it an FMX?

 

I posted a translation but referenced a link that may need to be approved by adult supervision. If it doesn't show up send me a PM. Basically it's a (D)197-/(4)4/(A)Ford Model/(P) Transmission Engineer Group/(7006)C6/(BA)26th (about) modification/and the 18 is unknown.

The mod starts at "B" as the first mod and continues to AA after Z, then BA after AZ, etc. "I" is not used (I'm not sure about "O" being used).

The link I posted is for Ford Part Numbers Description. Send me a PM with a real e-mail address if you would like me to send th elink and my other post doesn't come back.

 

No havi, it is a mid 70's truck c-6

 

I sent P.M. Julie, Thanks

 

OK. just by googling that number they all came up as FMX. My C6's are either 4x4 from 78 or newer, and an older C6 D4VP I think from a Lincoln.

 

Yep according to the chart that D4VP is out of a 61-81 Lincoln Continental. The next four numbers should also be 7006.

I wish the link had posted in my original post. Maybe Morris will let it through later!

B/B I sent you an e-mail response with the link and the breakdown.

PS in my quick description post I said it was the 26th mod, I lied it's wrapped around twice should be somewhere close to mod 52!

 

I got it Julie, Great information. Thank you

 

But be careful with it. According to FTE it must be subversive or something to not be allowed to be posted here....OYE!