Fuel psi gauge.
Thread Starter
|
Senior User
Joined: Apr 2009
Posts: 301
Likes: 0
From: Scenery hill,Pa.
Fuel psi gauge.
Im installing my gauge set i just purchased. Im putting in a fuel psi gauge and jw what some of you other guys are doing for it. I was thinking about just tapping into the fuel rail on the head since there is no shreider valve on the fuel filter housing like the 444e whch im more used to working on. Any ideas guys?
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
O-ring Boss port on back of the fuel filter reservoir. Most stand alone fuel filter gauge kits use this location. I have an adaptor with a schrader valve and cap in mine. Got it from Bob at diesel orings.com It works perfectly with my fuel injection pressure test kit. I just hook it up when needed. The hose is long enough to route outside the hood for diagnostics while driving.
Post Fiend
Joined: Jun 2006
Posts: 9,714
Likes: 2
From: White Mnt's,New Hampshire
you can use this
Replacement O-rings for Diesel Engines
where the 2 red arrows point here on the back of the fuel bowl..
Replacement O-rings for Diesel Engines
where the 2 red arrows point here on the back of the fuel bowl..
