bent ram
Thread Starter
|
Senior User
Joined: Mar 2008
Posts: 132
Likes: 0
bent ram
hey guys i got a 74 F-100 4X4 with the stock ram assist steering on it i keep having a few probs with it
1 the ram valve blows the orings when in deep mud and i crank thee wheel hard
2 the ram cylder is kinda finiky som times will work killer other times its like i got no power at all
3 the whole system is to low for what i do with it i bent the ram cylinder to day at a rock crawling meet ( im amazed it took this long for that to happen )
4 parts are a pain to come across
is there any thing you guys can think of that can help these probs i was thinkin about trying to make a hi steer but it im havein trouble lookin for where to start i have a 78 3/4 ton d-44 flat top for parts but i would like to keep the 15 " rim any ideas
thanks alott
kyle
1 the ram valve blows the orings when in deep mud and i crank thee wheel hard
2 the ram cylder is kinda finiky som times will work killer other times its like i got no power at all
3 the whole system is to low for what i do with it i bent the ram cylinder to day at a rock crawling meet ( im amazed it took this long for that to happen )
4 parts are a pain to come across
is there any thing you guys can think of that can help these probs i was thinkin about trying to make a hi steer but it im havein trouble lookin for where to start i have a 78 3/4 ton d-44 flat top for parts but i would like to keep the 15 " rim any ideas
thanks alott
kyle
