428 sonic check specs
Thread Starter
|
Senior User
Joined: May 2009
Posts: 105
Likes: 1
From: Staten Island
428 sonic check specs
As in some of my previous posts there is a heated debate as to if I have a 428 or not.Does anyone have the specs on a genuine unbored block that they have sonic checked.Individual cylinder specs would be preferred.
Hotshot
Joined: Feb 2009
Posts: 10,410
Likes: 77
From: Plankinton, SD
I wouldn't worry about other block specs as every block is going to have quite a variance in thickness on individual cylinders. I would just check the one you have and see what you got. I would think even at .030 over you should not have any less than .120 anywhere but I'm not positive on that. Hopefully no less than .100. Someone else should chime in but I would just check your own and see where it is.
