Wheel Width with V/B codes....
Thread Starter
|
New User
Joined: Feb 2009
Posts: 23
Likes: 0
Wheel Width with V/B codes....
Will an 05 X 4x4 with V/B codes take a 10 inch wide wheel? If so with what backspacing? Planning on going with 18" wheels, but a few that I've found and liked are only available 10 inches wide.
Last edited by BIGOLDEX; May 7, 2009 at 12:17 AM.
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
I can't see why not. Your only adding about an inch of wheel behind the flange. I don't know the stock spec, but I found one online that says 16x8" with 4.625 back space. so 16x10 (or 18x10) would have a backspace of 5.625" which 5.5 is probably close enough.
