Door panel removal
Thread Starter
|
New User
Joined: Mar 2004
Posts: 11
Likes: 0
From: Upstate NY
Door panel removal
Greetings, I need to remove the drivers side door panel to do some work on the window motor. It's a 2000 F-250 Super duty. Once I remove the power window panel which is held in by two clips, there is one screw near the door handle. That is as far as I got. I can find no other screws and at a loss of how it comes off. 
Trying my best not to break anything. Thanks for any help anyone can shed on this task.
Trying my best not to break anything. Thanks for any help anyone can shed on this task.
Postmaster
Joined: Sep 2008
Posts: 3,220
Likes: 0
From: VA
Take off the lens/reflector covering the courtesy light and there is a bolt there. Near the mirror there should be a little black trim piece as well. That snaps out. Lift up on panel and be careful not to go too far because you need to unplug the light. It just twists out from the back of the panel. Thats about it!
Hook it, I'll pull it.
Joined: May 2007
Posts: 15,037
Likes: 4
From: Grand Lake, La.
