1999 - 2016 Super Duty 1999 to 2016 Ford F250, F350, F450 and F550 Super Duty with diesel V8 and gas V8 and V10 engines

Sponsored by:

Help! Help! Help!

Reply Subscribe

Search this Thread

Old

May 1, 2009 | 09:13 PM

#1

BoulderBob

Thread Starter

|

New User

Joined: Apr 2009

Posts: 9

Likes: 0

Help! Help! Help!

I started installing an Icon mini pak, the drivers side went pretty well. The passenger side has been trouble. The axle shifted towards the drivers side about one inch and I can't get the axle to line up with the allignment pin for the leaf spring.. I'm in over my head! I'm thinking about removing the pan rod to see if that could help. The guy at Icon said the axle would move about 1/8 of an inch??

Reply

Old

May 1, 2009 | 09:52 PM

#2

riggz

Postmaster

Joined: Mar 2007

Posts: 2,612

Likes: 2

From: Dunwoody, GA

When I did my brothers it shifted a little bit and took a bit of banging and pushing but it eventually slid back into place. You should have at least 1-2 other people helping you.

Reply

Old

May 1, 2009 | 10:50 PM

#3

BoulderBob

Thread Starter

|

New User

Joined: Apr 2009

Posts: 9

Likes: 0

Thank you and you are correct. I have a friend to help me tomarrow. I've installed four other lifts on various trucks but none of them have been this stuborn. This truck kicked my butt today

Reply

Old

May 2, 2009 | 08:14 AM

#4

riggz

Postmaster

Joined: Mar 2007

Posts: 2,612

Likes: 2

From: Dunwoody, GA

Yeah, I attempted to put on my 3.5" shackle and hanger lift and I wasn't able to get it complete by myself. Most of us learn the hard way.

Reply

Old

May 2, 2009 | 12:52 PM

#5

Furian

You Keep What You Kill

Joined: Dec 2006

Posts: 4,902

Likes: 2

From: Huntersville, NC

Icon makes precision parts... there is very little wiggle room. Hang in there, you'll get r done!

Reply

Old

May 3, 2009 | 06:00 AM

#6

high ho silver

Posting Guru

Joined: Apr 2004

Posts: 1,342

Likes: 0

From: Georgia

Quote:

Originally Posted by BoulderBob

I started installing an Icon mini pak, the drivers side went pretty well. The passenger side has been trouble. The axle shifted towards the drivers side about one inch and I can't get the axle to line up with the allignment pin for the leaf spring.. I'm in over my head! I'm thinking about removing the pan rod to see if that could help. The guy at Icon said the axle would move about 1/8 of an inch??

The directions didn't say remove the trac bar bolt first?

Get a come-a-long and pull it back over...that was my helping hand.

Reply

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 08:17 PM.