pick up bed on a 54
Thread Starter
|
Mountain Pass
Joined: Mar 2008
Posts: 186
Likes: 0
From: Crowborough East Sussex u
pick up bed on a 54
Hi all when bolting down the pick up bed at the rear what goes between the chassi and the rear cross member of the pick up bed?? is it just thick peace's of rubber with a hole in the middle where the bolts go though
Elder User
Joined: Mar 2003
Posts: 929
Likes: 0
From: S.C.
Hi, There are kits you can buy, just mounting pads...I've seen them in a hard material and in rubber, different thicknesses. When I put mine back together I used some like that and made some others myself depending on the thickness I needed. I think it's just supposed to dampen the chassis to bed.
I'm sure the experts here can correct me where I'm off, It's still early on the west cost so they might not have had their coffee yet.
Ed
I'm sure the experts here can correct me where I'm off, It's still early on the west cost so they might not have had their coffee yet.
Ed
