Looking for 3D Models
Thread Starter
|
New User
Joined: Oct 2005
Posts: 24
Likes: 0
From: San Diego, Ca
Looking for 3D Models
I am beginning to design a Ford based race car on Solidworks. I figured this might be a good place to find some information.
I need a 3D Cad model (prefer solidworks, but can import most) for a ford 302 engine. If you have something, or know where to find it, I would really appreciate it.
Detailed drawings showing the bolt hole locations for all the brackets, headers, motor mounts etc. would also be extremely useful and would save me a LOT of time (and possible innacuracies) over trying to mic out my engine.
Thank you all for the help,
You can e-mail me info at:
chaoscreature@hotmail.com
I need a 3D Cad model (prefer solidworks, but can import most) for a ford 302 engine. If you have something, or know where to find it, I would really appreciate it.
Detailed drawings showing the bolt hole locations for all the brackets, headers, motor mounts etc. would also be extremely useful and would save me a LOT of time (and possible innacuracies) over trying to mic out my engine.
Thank you all for the help,
You can e-mail me info at:
chaoscreature@hotmail.com
Cargo Master
Joined: May 2007
Posts: 2,071
Likes: 36
From: British Columbia
Small block dimensions
This kind of information is pretty tough to find from us hobbyists. One of the early Ford Motorsports catalogs I've seen (early 1980s I think) had the dimensions for the bellhousing bolts, and the current ones have cylinder spacing and deck height.
Maybe some of those that are into "blueprinting" can refer to said blueprint specifications and provide information.
This seems like an interesting project, please keep us posted of your progress.
Maybe some of those that are into "blueprinting" can refer to said blueprint specifications and provide information.
This seems like an interesting project, please keep us posted of your progress.
Thread Starter
|
New User
Joined: Oct 2005
Posts: 24
Likes: 0
From: San Diego, Ca
Might be a while
Beanscoot,
Yeah, CAD files are tough to find and the people who have them tend to hoard them.
I found some drawings for the front and rear views of a SBF showing the trans mounting hole locations and the various frontside bracket mounting locations. I want to attach these, but I dont see the "manage attachments" icon anywhere on the "Reply to Thread" page.
Am I doing somethign wrong or do I need administrator approval?
Thanks,
Chaoscreature
Yeah, CAD files are tough to find and the people who have them tend to hoard them.
I found some drawings for the front and rear views of a SBF showing the trans mounting hole locations and the various frontside bracket mounting locations. I want to attach these, but I dont see the "manage attachments" icon anywhere on the "Reply to Thread" page.
Am I doing somethign wrong or do I need administrator approval?
Thanks,
Chaoscreature
Cargo Master
Joined: May 2007
Posts: 2,071
Likes: 36
From: British Columbia
I am not so good at the managing attachment stuff. Maybe someone else can help there.
Where did you find the front and rear engine bolt locations? As you say, it's tough to find this information.
Where did you find the front and rear engine bolt locations? As you say, it's tough to find this information.
Thread Starter
|
New User
Joined: Oct 2005
Posts: 24
Likes: 0
From: San Diego, Ca
I stumbled upon them while searching other forums. I figured I would ask around here since I am a member here and there seem to be a lot of knowledgable people.
As soon as I figure out the images thing I will get what I have posted.
Thanks again,
As soon as I figure out the images thing I will get what I have posted.
Thanks again,
Thread Starter
|
New User
Joined: Oct 2005
Posts: 24
Likes: 0
From: San Diego, Ca
Check out the new Album in Forums/Albums, SBF Blueprints and Dimensions. As I find more stuff, I will post it there and I hope other people contibute as well.
Thanks,
Chaoscreature
Thanks,
Chaoscreature
Thread
Thread Starter
Forum
Replies
Last Post
fordtrck302
1978 - 1996 Big Bronco
8
Aug 28, 2016 10:16 PM
Brad Fitch
1961 - 1966 F-100 & Larger F-Series Trucks
6
Jan 3, 2012 10:47 AM
JEAG
1961 - 1966 F-100 & Larger F-Series Trucks
4
Sep 17, 2008 11:05 AM
