I don't need doors ,but can use some floor pans and a possi rearend.

 

Anyone know where I can get a drivers side rear hub for a 97 F-350?

 

$$$$ for good 351M windsor low miles for my 78 f-150 4x4. i live in Concrete WA. don't want to travel to far.

 

$$$$ for chrome grill guard for 94 explorer, eddie bauer.

 

I have a 292 cu.in.Y block out of a 1959 F100 that I would like to go to a good home.The numbers for this engine are C2AE 6015 C which works out to be a the V8 used in 1962 cars 62-64 trucks.
I bought the truck for parts last summer and drove onto and off the trailor we moved it with and to the store and back a couple times. It ran well. It has a 2-barrel Holley with manual choke, bell housing, flywheel and clutch, generator w/regulator and front engine mount. I already have another engine rebuilt and mounted for this project but I needed a good bed and misc frame brackets so I bought this truck for parts. It's here in Seattle on a pallet where I work so if you are close and want it send me a PM and we will make a time.

Cyrus
_____________________
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... HELL YEAH!!! What a ride!

 

According to Les Schwab my Brake Proportioning Valve on my 79 F-150 2WD has gone bad and I need another ASAP. They are having a hard time finding one. Anybody have one or know a place I can go to get one local??

 

I need a fan shroud stamped D3TA-CA

it's for a 79 F-150 302 2wd auto with a/c

i need one bad

 

I have a driverside Ford ranger side view mirror for sale. It came off of my (Now gone) 96 Ranger. It is a good replacement for someone that may have busted the glass, needs replacement mirror glass, or just needs one cause theirs was busted off.

It's used and is missing a little of the edge trim, I am asking $5 for it. If I have to ship it I am going to have to ask for $8 to ship it. I can most likely meet up if it isn't too far. I live in Silverdale.

Here are some pics.








I just need to get rid of the extra stuff I have around.

 

I have a 1976 f250 2wd crew cab forsale. $800 in Spokane

 

WTB: I need a CD-6 head unit to put in my Excurison. I found out tthe hard way that not all CD-6 are the same so I need one out of a vehicle that has the DVD/VHS rear entertainment system.

I think the part # on my previous radio was 3C7T-18C815-AB

PM or email me. I need it pronto

 

I want a Dana 44 solid axle out of a '77-'79 F150 or Bronco (with coild springs). I want to try to get it as complete as I can hub-to-hub, caliper-to-caliper, radius arms blah blah blah. PM me if you've got one. Preferably eastern washington, as I'm in La Grande right now and it'd be a looooong drive otherwise.

 

Canopy from my 1985 ford f250 diesel, regular bed. Comes with all functional glass intact and good condition. It is missing the access door and has a small outer crack (doesnt leak as its superficial) on the roof but its nice and cheap $100 on the Eastside of Seattle... its brown

 

Hey all, I am unemployed and need some money fast so the "Old One" is up for sale.

It has sat for about 6 months and needs an alternator to run(alternator has a bad rectifier and is chrome plated). It has a 390 2bbl, C6 auto, new front springs and round gauge panel from a 77 medium duty Ford. Has a Dana 60 rear w/3.73 gears and limited slip. Also has 16 in. rims(I got rid of the 16.5 in. ones) and a 16.5 in. spare.

$300 or best offer. Please don't beat me up too bad on the price we really need the money.

Also can throw in an Edlebrock intake for it.

I am offering it on FTE for the next two days then it goes on craigslist if it doesn't go.

 

How is the body and is the bed solid and not cracked or rotted out? I need it for my 69 high-boy. Thanks Sean

 

The body is really solid with just some surface stuff. The bed has pinholes in each corner on the bed floor and some pitting with rust holes on the left wheel well.