Feb B.S. Thread
#2
#3
#4
Afternoon everyone! Thanks for starting the new thread Tom. By the way if you want to have a waterpump party I still havent got mine done in my '94. The pump is still sitting here waiting for me to put it in. Jay mentioned over in the Jan bs thread that your pic of the Dodge loader made it over to psn. Your going to make this guy famous yet. I am hoping some day I will catch him using it and I can get a vid of it.
Jay did ya get the brakes and tv fixed yet? We just picked up a little fresh powder this morning.
Thomas glad you were'nt too late for class. Not a good way to start the week out.
Jay did ya get the brakes and tv fixed yet? We just picked up a little fresh powder this morning.
Thomas glad you were'nt too late for class. Not a good way to start the week out.
#5
Thanks for the mention in the old post Troy.
I just got the brake parts delivered at 3pm so those go in tonight. I would be suprised if we have even 1/2" of snow so far.
Probably work on the TV tonight also. At a quick glance I did not see any bad resistors but I may need to unsolder and check a few "pico" style fuses. Apparently you cannot accurately meter them while still soldered on both sides so you have to desolder one leg. Blah!
I just got the brake parts delivered at 3pm so those go in tonight. I would be suprised if we have even 1/2" of snow so far.
Probably work on the TV tonight also. At a quick glance I did not see any bad resistors but I may need to unsolder and check a few "pico" style fuses. Apparently you cannot accurately meter them while still soldered on both sides so you have to desolder one leg. Blah!
#6
#7
Can't get the brake caliper piston to retract on one side. Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!
Got the two fuses replaced on the TV circuit board. On was bad, the other I accidentally ruined because I was a dumb a$$.. The kit came with two so no harm, no foul. Next are the two IC's. I need a different solder sucker first. The cheapo one I bought does not suck. haha
Got the two fuses replaced on the TV circuit board. On was bad, the other I accidentally ruined because I was a dumb a$$.. The kit came with two so no harm, no foul. Next are the two IC's. I need a different solder sucker first. The cheapo one I bought does not suck. haha
Trending Topics
#8
#10
#14
#15