Heard a Clunk, Won't Reverse
Thread Starter
|
Senior User
Joined: Feb 2004
Posts: 140
Likes: 0
From: Vegas
Heard a Clunk, Won't Reverse
Hey everyone. I was leaving for work this afternoon, and when i was backing out of my driveway I heard a clunk from what seemed like the front end. It didn't sound right so I slowly drove up my street listening for anything else.
About 50 feet later I heard it again and decided to head back since I had a 20 mile drive ahead of me and I didn't want to break down on the highway. After I got it back on the driveway, I put it in reverse and let go of the brake. The truck rolled back about 3 feet and just stopped. Drove it back up a bit, tried it again, and it did the same thing. I was hesitant to give it some gas and took my other car to work instead.
What could be the problem here? Tranny, transfer case, differential, etc? I replaced my rear end early last year after the gears practically exploded. I haven't had any problems since and before today, everything had been running great. Any suggestions? Thanks.
About 50 feet later I heard it again and decided to head back since I had a 20 mile drive ahead of me and I didn't want to break down on the highway. After I got it back on the driveway, I put it in reverse and let go of the brake. The truck rolled back about 3 feet and just stopped. Drove it back up a bit, tried it again, and it did the same thing. I was hesitant to give it some gas and took my other car to work instead.
What could be the problem here? Tranny, transfer case, differential, etc? I replaced my rear end early last year after the gears practically exploded. I haven't had any problems since and before today, everything had been running great. Any suggestions? Thanks.
