Show your pics of EX and Trailer!!!!!!
#676
My 2004 Ex and Outback 300BH
[IMG]<a href="http://s1310.photobucket.com/user/fruth4camp/media/2012-10-12122818.jpg.html" target="_blank"><img src="http://i1310.photobucket.com/albums/s650/fruth4camp/2012-10-12122818.jpg" border="0" alt=" photo 2012-10-12122818.jpg"/></a>[/IMG]
2004 Ford Ex 6.0. Banks ram air, six gun and speed loader, 4" MBRP turbo back, 6" ProComp lift, 35" Nittos, studded and deleted, coolant filter. Roof air wing and rear mud flaps. This was taken before rear AirLift bags and front 2" shackle lift. Keystone Outback 300BH.
2004 Ford Ex 6.0. Banks ram air, six gun and speed loader, 4" MBRP turbo back, 6" ProComp lift, 35" Nittos, studded and deleted, coolant filter. Roof air wing and rear mud flaps. This was taken before rear AirLift bags and front 2" shackle lift. Keystone Outback 300BH.
#677
#678
#679
#681
#683
Thanks guys, The EX's primary job is tow rig and I really wanted it to sit near level while pulling so I did a little extra when I modded the B codes to allow for a level ride while loaded. See sig pic for solo stance.
I too love camping Gerry, in 2015 my vacation allowance will max out at 6 weeks (30 years of service). Can't wait!
My bride just got the call from our RV dealer, the new Eagle TT is here! WooHoo! We will head over tommorow to see it and get exact measurements for the HA hitch parts I will need. We are giving them some do-dads to mount and hope to bring it home next week. I will have pics once I get it hitched up. I plan to hit the Cat Scales on the way home to get some baseline weights.
I too love camping Gerry, in 2015 my vacation allowance will max out at 6 weeks (30 years of service). Can't wait!
My bride just got the call from our RV dealer, the new Eagle TT is here! WooHoo! We will head over tommorow to see it and get exact measurements for the HA hitch parts I will need. We are giving them some do-dads to mount and hope to bring it home next week. I will have pics once I get it hitched up. I plan to hit the Cat Scales on the way home to get some baseline weights.
#684
#685
#686
My rear B codes got the typical mod as outlined in Robert's post on the V/B mods (I also answered some of your questions there) using the thicker EX spacers and bottom two leaves. My little extra includes the taller F-350 rear blocks and I took the Ex's factory "slapper bar" traction bar (that bottom front half only leaf with the rubber snubber on the end) and cut it up, I used two sections of it on each side for addtional lift. I gained about 4.5' over my factory setup with these mods to the rear suspension.
#687
Nice looking combo! I was thinking about a roof mounted wing for ours but we just traded our ToyHauler for a TT so I may need the roof space for kayaks now.
#689
The ability to post attachments is a benefit given to paid supporting members.
Stewart