Speedo Gear
Thread Starter
|
Posting Guru
Joined: Jan 2009
Posts: 1,145
Likes: 0
Speedo Gear
hey everyone,,,im going to be putting bigger tires on my 77 150 due to the fact that i hate how small the wheel wells look and i was wondering how hard it will be and to change the gear out for my speedo so it reads correctly,,i have never done this before so any tips would be apprciated 77 f150 400 2wd
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
The plastic DRIVEN gear, on the end of the speedometer cable, come with 16, 17, 18, 19, 20, and 21 teeth.
The same gears have been used since 1960, and are available from Ford.
Prices range from $2.00 to $3.50 each.
Some F100/350's with a manual transmission used fiber or iron DRIVEN gears. These are obsolete, and can be tough to find.
The same gears have been used since 1960, and are available from Ford.
Prices range from $2.00 to $3.50 each.
Some F100/350's with a manual transmission used fiber or iron DRIVEN gears. These are obsolete, and can be tough to find.
