hey everyone iam new here, but i need a lil help on my setup i got a 1967 f100 an i want to put bagges on it now i think i know how iam goin to do the back but i donno how to do the front... any in put woo help

 

if any one has some pic of the i beam bagged sit up that wood help.... plz anyone

 

If its got coil springs, you just replace the coil springs with airbags right?

 

Hey check out Marz-68 gallery, he's done some a$$ kickin work on his. Later.

 

hey man I got a 67 myself and have dropped it 4 to 5 inches all around.I;ve been thinking about baggin it but havn;t got there yet .another idea i had was channeling the body.keep me posted be interesting to know what happens.

 

well i did look at Marz-68 pic but i really dont want to get that in to it i was thinkin of putting a crown vic ifs but i donno

 

ok now how did you get the front droped 4inch

 

You can bag,Z and body drop your truck to get it really low on stock i beams.
You can also go with a mustang 2 setup kinda pricy.
There is laso a crown victoria suspension that will bolt in to you frame, you will have to cut out your stock crossmember first.

 

Check out the thread "68 coming home tomorrow" that guy had detailed pics of how he put bags on beams.
You can also just check out my gallery.LOL

 

Is there any difference with the 70? it seems like all the ways to lower the truck are expensive so I might as well bag it... not meaning to jack a thread sorry...

 

hey no problem thats what i was thinking too

 

hey marz-68 how do you body drop it. i never seen any one do it

 

Heres a quick drawing.
The hardest part would be remounting the radius arms and the steering column conections.

 

ok i get now i think so you cut the hole langth of the cab on the frame right? but do you use the pice u cut out?

 

you first need to weld in the 2x4x1/4 wall rectangular tube once it's welded in then you cut of the excess metal from the top of the frame.