v10 headers $1.00 (so far)
Hotshot
Joined: Mar 2007
Posts: 10,101
Likes: 40
From: Pa
Posted the Link
eBay Motors: FORD V-10 HEADERS FOR SALE... SUPERDUTY/ EXCURSION (item 150326868736 end time Feb-21-09 07:53:05 PST)=
The tubes look long for shorties. Sort of look like Banks headers without the Y-pipe part. Banks don't have a welded in Y-pipe like the Thorleys.
http://www.bankspower.com/products/show/126/38
Heres a picture of the gibsons off Summits site. (Has 5 tubes per header so they look like V10 headers)
http://store.summitracing.com/largei...b-gp125s_w.jpg
eBay Motors: FORD V-10 HEADERS FOR SALE... SUPERDUTY/ EXCURSION (item 150326868736 end time Feb-21-09 07:53:05 PST)=
The tubes look long for shorties. Sort of look like Banks headers without the Y-pipe part. Banks don't have a welded in Y-pipe like the Thorleys.
http://www.bankspower.com/products/show/126/38
Heres a picture of the gibsons off Summits site. (Has 5 tubes per header so they look like V10 headers)
http://store.summitracing.com/largei...b-gp125s_w.jpg
Thread Starter
|
Senior User
Joined: Sep 2006
Posts: 115
Likes: 0
thanks dkf, yeah I thought banks looked the closest, definetely not cheapo ebay, thorley, jba, ford performance products or the gibsons you linked. I thought also maybe hedman and or borla as a possibility.
Hotshot
Joined: Mar 2007
Posts: 10,101
Likes: 40
From: Pa
I think you can rule out Hedmans. The mounting flanges on the hedmans are split on each header. Looks like the headers in the auction have 1pc. flanges. Also you can tell the headers are 400 series stainless because of the finish. The Hedmans are steel so they would be rusted much worse.
Hedman Street Hedders: HED-89666 - summitracing.com
Auction description says the mounting flanges are 1/2" thick. The Banks headers have 5/8" flanges. (Guy probably can't read a ruler) I've never seen Borlas but I think they have thinner flanges around 5/16"-3/8" or so. Either Borlas or Banks I'd say. They don't make Borlas anymore. Borlas have 18Ga. tubes and Banks has 16Ga. tubes so in theory the Banks would be quieter.
If you want the headers watch the item but don't bid on it until the end. I always throw a bid in at the last 20 seconds of the auction.
Hedman Street Hedders: HED-89666 - summitracing.com
Auction description says the mounting flanges are 1/2" thick. The Banks headers have 5/8" flanges. (Guy probably can't read a ruler) I've never seen Borlas but I think they have thinner flanges around 5/16"-3/8" or so. Either Borlas or Banks I'd say. They don't make Borlas anymore. Borlas have 18Ga. tubes and Banks has 16Ga. tubes so in theory the Banks would be quieter.
If you want the headers watch the item but don't bid on it until the end. I always throw a bid in at the last 20 seconds of the auction.
Trending Topics
Elder User
Joined: May 2003
Posts: 858
Likes: 1
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Super Moderator
Joined: Oct 2005
Posts: 24,308
Likes: 42
From: SW Virginia
LMAO
. If he does, I'll give it to my brother. Talk about being able to screw up an anvil with a rubber mallet! He's hard on vehicles and probably shouldn't be driving.
. If he does, I'll give it to my brother. Talk about being able to screw up an anvil with a rubber mallet! He's hard on vehicles and probably shouldn't be driving.
Senior User
Joined: Jan 2009
Posts: 419
Likes: 1
In his description he says he's asking $200 for them. I'll bet he dosent know how to use ebay all that well and didn't start with a reserve. I'm also willing to bet if someone gets them for under $100 that he wont ship them since he didn't get what he wanted.
Former Vendor
Joined: Sep 2000
Posts: 2,627
Likes: 76
From: South Carolina
A picture is worth a thousand words.. Can you say flow... thats a good comparo
Hotshot
Joined: Mar 2007
Posts: 10,101
Likes: 40
From: Pa
I'm shure Banks is going to charge a lot more than $110 for their Y-pipe.
Anyone know if the Banks headers will bolt up to the stock Y-pipe? If not you have to buy the Banks Y or fab a new one. Food for thought.
Anyone know if the Banks headers will bolt up to the stock Y-pipe? If not you have to buy the Banks Y or fab a new one. Food for thought.