Distributor Wiring
Thread Starter
|
Junior User
Joined: Aug 2008
Posts: 67
Likes: 0
Good news guys!
It finally came off. Apparently the key pin was not completely out, although it did lack much from being out. Once I removed the pin, it was still stuck and would not move. I began playing with it and actually had to twist it as i pulled up, then she came right out.
Now just hope I can put it back together.
Thanks for all you help.
It finally came off. Apparently the key pin was not completely out, although it did lack much from being out. Once I removed the pin, it was still stuck and would not move. I began playing with it and actually had to twist it as i pulled up, then she came right out.
Now just hope I can put it back together.
Thanks for all you help.
