Grill Guard Placement?
Thread Starter
|
Senior User
Joined: Feb 2008
Posts: 237
Likes: 0
Grill Guard Placement?
With the grill guard in this as: eBay Motors: 99-04 EXCURSION SUPERDUTY F250 F350 GRILLE GUARD BLACK (item 370144494215 end time Feb-12-09 17:19:23 PST) How would it bolt on? I have seen a few ones that bolt like this. On the inside of the tow hooks, not the outside? Thanks
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
Usually, you remove the bolts (either 2 or all four), placing a bracket around the tow hooks. Tighten the bolts back up and then bolt the grille guard to the brackets. This is how most are done.
Senior User
Joined: Mar 2008
Posts: 185
Likes: 0
From: New York
This looks just like mine (also from ebay) - there should be pics in my gallery. Hooks are on the inside of the brackets - had to be slid in just
a little to make it work but tow hooks were preserved. They're now covered up because I added a front receiver hitch - but all in all the brush guard was a relatively easy install.
a little to make it work but tow hooks were preserved. They're now covered up because I added a front receiver hitch - but all in all the brush guard was a relatively easy install.
